Bridges

Besides having dental implants, there are two main ways to replace missing teeth. The first is with a removable false tooth or teeth – a partial denture. The second is with a fixed bridge.

A dental bridge is usually used where there are fewer teeth to replace, or when the missing teeth are only on one side of the mouth. Bridges are usually made of a precious metal base however, sometimes there are other non-precious metals used in the base to reduce the cost.

If the bridge will show, porcelain is then bonded to the base to make it look more natural.

A bridge is a device that is used as one of the ways of replacing a missing tooth. There are two types of bridge: a conventional bridge or an adhesive bridge.

Conventional bridge

A false tooth is attached to a crown on one or both sides of a gap. It involves drilling of the tooth (or teeth) to which the false tooth will be attached. The crowns are either made of gold, a non-precious metal, or a combination of metal and porcelain. The false tooth is usually made out of tooth-coloured porcelain.

Once the teeth have been prepared, a mould (impression) of the affected teeth is made. This is sent to a laboratory for the bridge to be made. In the meantime, to prevent any sensitivity, a temporary bridge covers the affected teeth.

Once it has been manufactured, the bridge will be tried in place. It may require some adjustments before it is cemented in permanently.

The advantages of a conventional bridge are that it is strong and not removable. The disadvantage is that it involves drilling of the adjacent teeth.

Adhesive bridge

A false tooth is attached to a wing of metal and the wing is then glued to the adjacent tooth.

With this type of bridge there is no (or only a small amount of) drilling of the adjacent teeth and an injection is normally not required. Once the teeth have been prepared, a mould is made and sent to a laboratory which makes the bridge. No temporary bridge is required whilst in this period.

When using an adhesive bridge to replace a front tooth, the metal wing is stuck on to the back of the adjacent tooth and so cannot be seen from the front. An adhesive bridge replacing a back tooth will have metal wings on one or both sides of the gap. These may be visible if the mouth is opened wide.

The adhesive bridge is stuck on with a very strong glue. The process requires that the teeth be dry whilst gluing.

The advantages of an adhesive bridge are that it is not removable and requires very little drilling of the adjacent teeth. The disadvantage is that it sometimes falls off (though it is easily stuck back on). An adhesive bridge might not be suitable for those who grind their teeth or who play contact sports.

A bridge is not always possible or suitable, for example if there are too many teeth missing or if the remaining teeth or gums are not healthy. In some instances, it may be best to leave a gap.

You can replace missing teeth for several reasons. Your appearance is one reason. Another is that the gap left by a missing tooth can mean greater strain is put on the teeth at either side.

A gap can also mean your ‘bite’ is affected, because the teeth next to the space can lean into the gap and alter the way the upper and lower teeth bite together. This can then lead to food getting packed into the gap, which causes both decay and gum disease.

  • Besides having dental implants, there are two main ways to replace missing teeth. The first is with a removable false tooth or teeth – a partial denture. The second is with a fixed bridge. 

  • A dental bridge is usually used where there are fewer teeth to replace, or when the missing teeth are only on one side of the mouth. Bridges are usually made of a precious metal base.

  • If the bridge will show, porcelain is then bonded to the base. Sometimes, there are other non-precious metals used in the base to reduce the cost.

  • You should replace missing teeth for a number of reasons. Your appearance is one reason. Another is that the gap left by a missing tooth can mean greater strain is put on the teeth at either side.

  • A gap can also mean your ‘bite’ is affected, because the teeth next to the space can lean into the gap and alter the way the upper and lower teeth bite together. This can then lead to food getting packed into the gap, which causes both decay and gum disease.